Integral, Elastomer, RIM
Integral, Elastomer, RIM
Excellent Demolding
TeknikKimya Integral, Elastomer, RIM Release Agents have excellent mold release and very low buildup properties, which are suitable for integral, elastomer and RIM systems used in automotive and furniture industries. Ready-to-use, concentrated-ready-to-use and dilutable versions are available. In addition, mold release agents have been developed as water-based, non-toxic and eco-friendly.
- Economical
- Minimum consumption
- Very low built-up
- Excellent mold release
- Homogen surface
- Ability to work in wide mold temperature ranges and complex molds
Armaliz 2600 Series Release Agents
Armaliz 2600 Series Release Agents
Armaliz 2600 Series are formulated as water-based, give good results at wide range temperature and can be applied to all different kinds of molds. These products do not have a fire risk during storage, transport and usage. Concentrated versions of these release agents can be diluted with water.
Sintaliz 1000 Series Release Agents
Sintaliz 1000 Series are formulated especially for elastomer systems. Ready-to-use and concentrated versions of this series are available. Release agents prepared with Class I A1 type of solvent are preferable for fast drying properties while, the others prepared with Class II A 2 and Class III A3 are preferable for having higher flash point.
Sintaliz 5000 Series Release Agents
Sintaliz 5000 Series are formulated with different types of solvents according to usage. Products with different degrees of opacity have the properties of very low built-up. Release agents which are formulated with Class I A1 type solvents are preferred for faster drying characteristics while, Class II A2 and Class III A3 type solvent release agents due to their high flash point.
TECHNICAL AND PHYSICAL PROPERTIES
| Product | Base | Properties |
|---|---|---|
| Armaliz 2610 | Water | Semi-matt surface for TRIM, armrest, floor mat and steering wheel |
| Armaliz 2630 CONZ | Water | Semi-matt surface for TRIM, armrest, floor mat and steering wheel, dilutable |
| Sinta 1197 | Solvent-Class III A3 | Elastomer, smooth, homogeneous, semi-matt surface |
| Sintaliz 1022 | Solvent-Class I A1 | Ready-to-use, very low built-up |
| Sintaliz 1122 | Solvent-Class I A1 | Ready-to-use, glossy surface, very low built-up for filter systems |
| Sintaliz 5005 | Solvent-Class I A1 | Elastomeric, smooth, homogeneous, glossy surface |
| Sintaliz 5065 | Solvent-Class I A1 | Ready-to-use, semi-matt surface for floor mat |
| Sintaliz 5081 | Solvent-Class I A1 | Ready-to-use, glossy surface, very low built-up |
| Sintaliz 5082 | Solvent-Class I A1 | Ready-to-use, glossy surface, very low built-up for filter systems |
| Sintaliz 5110 | Solvent-Class II A2 | Semi-matt surface |
| Sintaliz 5111 | Solvent-Class I A1 | Ready-to-use, semi-matt surface, very low built-up for filter systems |
Class I A1 (Low flash point), Class II A 2 (Medium flash point), Class III A3 (High flash point)
